|
Sign In to gain access to subscriptions and/or personal tools.
|
Fracture Surface Characterization of Dentin-bonded Interfacial Fracture Toughness Specimens
L.E. Tam
Department of Restorative Dentistry, Centre for Biomaterials, Faculty of Dentistry, 124 Edward Street, Toronto, Ontario, Canada M6G 1G6
R.M. Pilliar
Department of Restorative Dentistry, Centre for Biomaterials, Faculty of Dentistry, 124 Edward Street, Toronto, Ontario, Canada M6G 1G6
Although the current trend in dentin bonding favors the development of a hybrid layer interdiffusion zone for micromechanical bonding, the exact nature of the dentin-composite bond is still unclear. The objective of this study was to characterize the fracture surfaces of specimens used to measure interfacial fracture toughness. Morphological (SEM) and chemical (EDS and XPS) surface analyses were used for characterization. Fracture toughness specimens generally failed along the dentin-bonded interface in agreement with observed clinical failure modes.
Four sites of bond failure were identified within the dentin-composite interf aces when All-Bond 2, Scotchbond MultiPurpose, and Scotchbond 2 were used as the dentinal adhesives. These were located within (1) the smear layer, (2) a resin-modified layer between the interdiffusion zone and the adhesive resin, (3) a well-infiltrated hybrid interdiffusion zone, and (4) a non-infiltrated unsupported collagen layer.The interf acial region had a complex architecture which varied with the nature of the dentin, the dentin surface treatment, and the dentin bonding system. The sites of bond failure appeared to correlate with the interfacial fracture toughness and the extent to which polymerized resin infiltrated and acted to support the organic dentinal structures.
Key Words: Bonding • Dental Materials • Dentin • Failure of Dental Materials • Fractures
REFERENCES
- Andrade J. (1985). Surface and interfacial aspects of biomedical polymers. 1. Surface chemistry and physics. New York: Plenum Press.
- Cao Z., Huang L., Jiang J. (1992). A scanning electron microscopic observation of inner carious dentin after cleansing and of the dentin-resin interface. Quint Int 23:439-444.
- Dental Advisor (1993). Dentin bonding agents and adhesive cements. 8:1-8.Eick J (1992). Smear layer-materials surface. Proc Finn Dent Soc 88:225-242.
- Eliades G., Palaghias G., Vougiouklakis G. (1990). Surface reactions of adhesives on dentin. Dent Mater 6:208-216.[Medline]
[Order article via Infotrieve]
- Gabriel B. (1985). SEM: A user's manual for materials science. Metals Park: American Society for Metals.
- Gwinnett AJ, Kanca J. (1992). Micromorphology of the bonded dentin interface and its relationship to bond strength. Am J Dent 5:73-77.[Medline]
[Order article via Infotrieve]
- Harnirattisai C., Inokoshi S., Shimada Y., Hosoda H. (1992). Interfacial morphology of an adhesive composite resin and etched caries-affected dentin. OperDent 17:222-228.
- Lee R. (1993). Scanning electron microscopy and x-ray microanalysis. Englewood Cliffs, NJ: PTR Prentice-Hall, Inc.
- Misra D. (1989). Adsorption of 4-methacryloxyethyl trimellitate anhydride (4-META) on hydroxyapatite and its role in composite bonding. J Dent Res 68:42-47.
- Nakabayashi N. (1992a). Adhesive bonding with 4-META. Oper Dent 17(Suppl 5):125-130.
- Nakabayashi N. (1992b). The hybrid layer: a resin-dentin composite. Proc Finn Dent Soc 88(Suppl 1):321-329.
- Ozaki M., Suzuki M., Itoh K., Wakumoto S., Hisamitsu H. (1992). Laser-raman spectroscopic study of the adhesive interface; analysis between 4-meta/ MMA-TBB resin and bovine or human dentin. Dent Mater J 11:70-76.[Medline]
[Order article via Infotrieve]
- Pashley D. (1992). Smear layer: overview of structure and function. Proc Finn Dent Soc 88:215-224.[Medline]
[Order article via Infotrieve]
- Prati C., Biagini G., Nucci C., Castaldini C., Zucchini C. (1990). Effects of chemical pretreatments on dentin bonding. Am J Dent 3:199-206.[Medline]
[Order article via Infotrieve]
- Ruse ND, Smith DC (1991). Adhesion to bovine dentin-surf ace characterization. J Dent Res 70:1002-1008.
- Spencer P., Byerley TJ, Eick JD, Witt JD ( 1992). Chemical characterization of the dentin/adhesive interface by Fourier transform infrared photoacoustic spectroscopy. Dent Mater 8:10-15.[Medline]
[Order article via Infotrieve]
- Suzuki M., Kato H., Wakumoto S. (1991). Vibrational analysis by raman spectroscopy of the interface between dental adhesive resin and dentin. J Dent Res 70:1092-1097.
- Tam LE (1993). Fracture toughness and the dentin-composite interface (MSc Thesis). Toronto, ON, Canada: University of Toronto.
- Tam LE, Pilliar RM (1993). Fracture toughness of dentin/resin-composite adhesive interfaces. J Dent Res 72:953-959.
- Titley K., Chernecky R., Maric B., Smith D. (1993). Studies of the dentin-bonding interface (abstract). J Dent Res 72:263.
- Van Meerbeek B., Dehm A., Goret-Nicaise M., Braem M., Lambrechts P., Vanherle G. (1993). Comparative SEM and TEM examination of the ultrastructure of the resin-dentin interdiffusion zone. J Dent Res 72:495-501.
- Van Meerbeek B., Inokoshi S., Braem M., Lambrechts P., Vanherle G. (1992). Morphological aspects of the resin-dentin interdiffusion zone with different dentin adhesive systems. J Dent Res 71:1530-1540.
- Watson T. (1989). A confocal microscope study of the morphology of the tooth/restoration interface using Scotchbond 2 Dentin Adhesive. J Dent Res 68:1124-1131.
- Wolinsky L., Armstrong R., Seghi R. (1993). The determination of ionic bonding interactions of N-phenyl glycine and N-(2-hydroxy-3-methacryloxypropyl)-N-phenylglycine as measured by carbon-3 NMR analysis. J Dent Res 72:72-77.
Journal of Dental Research, Vol. 73, No. 3,
607-619 (1994)
DOI: 10.1177/00220345940730030601
 CiteULike  Complore  Connotea  Del.icio.us  Digg  Reddit  Technorati  Twitter What's this?
This article has been cited by other articles:
|
|
|
|
 
A. Misra, P. Spencer, O. Marangos, Y. Wang, and J. L. Katz
Parametric study of the effect of phase anisotropy on the micromechanical behaviour of dentin-adhesive interfaces
J R Soc Interface,
June 22, 2005;
2(3):
145 - 157.
[Abstract]
[Full Text]
[PDF]
|
|
|
|
|
|
|
B. Van Meerbeek, Y. Yoshida, P. Lambrechts, G. Vanherle, E.S. Duke, J.D. Eick, and S.J. Robinson
A TEM Study of Two Water-based Adhesive Systems Bonded to Dry and Wet Dentin
Journal of Dental Research,
January 1, 1998;
77(1):
50 - 59.
[Abstract]
[PDF]
|
|
|
|
|
|
|
J.J. Ten Bosch, J. De Vries, and M.H. Van Der Veen
X-Ray-Induced Photoelectron Spectroscopy of Dentin as a Function of Duration of Ar +-Ion Etching
Advances in Dental Research,
November 1, 1997;
11(4):
395 - 402.
[Abstract]
[PDF]
|
|
|
|
|
|
|
J.D. Eick, A.J. Gwinnett, D.H. Pashley, and S.J. Robinson
Current Concepts On Adhesion To Dentin
Critical Reviews in Oral Biology & Medicine,
January 1, 1997;
8(3):
306 - 335.
[Abstract]
[Full Text]
[PDF]
|
|
|
|
|
|
|
F.R. Tay, A.J. Gwinnett, K.M. Pang, and S.H.Y. Wei
Resin Permeation into Acid-conditioned, Moist, and Dry Dentin: A Paradigm using Water-free Adhesive Primers
Journal of Dental Research,
April 1, 1996;
75(4):
1034 - 1044.
[Abstract]
[PDF]
|
|
|
|
|
|
|
B. Van Meerbeek, L.J. Conn Jr, E.S. Duke, J.D. Eick, S.J. Robinson, and D. Guerrero
Correlative Transmission Electron Microscopy Examination of Nondemineralized and Demineralized Resin-Dentin Interfaces Formed by Two Dentin Adhesive Systems
Journal of Dental Research,
March 1, 1996;
75(3):
879 - 888.
[Abstract]
[PDF]
|
|
|
|
|
|
|
B. Van Meerbeek, M. Peumans, M. Verschueren, S. Gladys, M. Braem, P. Lambrechts, and G. Vanherle
Clinical Status of Ten Dentin Adhesive Systems
Journal of Dental Research,
November 1, 1994;
73(11):
1690 - 1702.
[Abstract]
[PDF]
|
|
|
|
|
