|
Sign In to gain access to subscriptions and/or personal tools.
|
In vitro Bond Strengths and SEM Evaluation of Dentin Bonding Systems to Different Dentin Substrates
J. Perdigao
Department of Operative Dentistry, The University of Coimbra Medical and Dental School, Coimbra, Portugal
E.J. Swift, Jr
Department of Operative Dentistry, The University of North Carolina, CB 7450, Brauer Hall, Chapel Hill, North Carolina 27599-7450
G.E. Denehy
Department of Operative Dentistry, The University of Iowa, Iowa City, Iowa 52242
J.S. Wefel
Department of Pediatric Dentistry and Dows Institute for Dental Research, The University of Iowa, Iowa City, Iowa
K.J. Donly
Department of Pediatric Dentistry and Dows Institute for Dental Research, The University of Iowa, Iowa City, Iowa
In comparison to enamel, bonding to normal dentin is a greater challenge because of its organic constituents, fluid-filled tubules, and variations in intrinsic composition. Bonding to sclerotic dentin is even more difficult. To evaluate the shear bond strengths of four adhesive systems to dentin substrates with different levels of mineralization, 120 extracted human teeth were randomly assigned to three groups (n = 40). After mid-coronal dentin was exposed, groups of specimens were artificially hypermineralized by immersion in a remineralizing solution, demineralized by means of an acetic acid demineralizing solution, or stored in distilled water to model sclerotic, carious, and normal dentin, respectively. Resin composite was bonded to dentin by use of commercial adhesive systems. After the specimens were thermocycled, shear bond strengths were determined in an Instron universal testing machine. Dentin substrates and resin/dentin interfaces were examined by SEM. For each adhesive system, the mean shear bond strength to normal dentin was significantly higher than that to either of the other substrates. Shear bond strengths to hypermineralized dentin were significantly higher than those to demineralized dentin with all adhesives except Prisma Universal Bond 3.
Key Words: Dental Bonding Dentin.
REFERENCES
- Albers HF (1990a). Dentin-resin bonding. ADEPT Report 1:33-44.
- Albers HF (1990b). Light-cured fluoride releasing liners. ADEPT Report 1:1-8.
- Asmussen E., Uno S. (1992). Adhesion of restorative resins to dentin: chemical and physicochemical aspects. Oper Dent (Suppl 5):68-74.
- Barkmeier WW, Huang C-T. Hammesf ahr PD, Jef f eries SR (1990). Bond strength, microleakage, and scanning electron microscopy examination of the Prisma Universal Bond 2 adhesive system. J Esthet Dent 2:134-139.[Medline]
[Order article via Infotrieve]
- Barkmeier WW, Suh BI, Cooley RL (1991a). Shear bond strength to dentin and Ni-Cr-Be alloy with the All-Bond universal adhesive system. J Esthet Dent 3:148-153.[Medline]
[Order article via Infotrieve]
- Barkmeier WW, Cooley RL, Douville CJ (1991b). Adhesive resin bond strength to dentin and Ni-Cr-Be alloy (abstract). J Dent Res 70:526.
- Barkmeier WW, Cooley RL (1992). Laboratory evaluation of adhesive systems. Oper Dent (Suppl 5):50-61.
- Barkmeier WW, Jefferies SR (1992). Dentin adhesion using acid conditioners with Prisma Universal Bond 2 (abstract). J Dent Res 71:170.
- Bowen RL (1985). Bonding of restorative materials todentin: the present status in the United States. Int Dent J 35:155-159.[Medline]
[Order article via Infotrieve]
- Bowen RL, Cobb EN, Rapson JE (1982). Adhesive bonding of various materials to hard tooth tissues: improvement in bond strength to dentin. J Dent Res 61:1070-1076.
- Bowen RL, Marjenhoff WA (1991). Development of an adhesive system for bonding to hard tooth tissues. J Esthet Dent 3:86-90.[Medline]
[Order article via Infotrieve]
- Brännström M., Johnson G., Nordenvall K-J (1979). Transmission and control of dentinal pain: resin impregnation for the desensitization of dentin. J Am Dent Assoc 99:612-618.[Abstract]
- Brown WS, Jacobs HR, Thompson RE (1972). Thermal fatigue in teeth. J Dent Res 51:461-467.
- Buonocore MG (1955). A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res 34:849-853.
- Buonocore M., Wileman W., Brudevold F. (1956). A report on a resin composition capable of bonding to human dentin surfaces. J Dent Res 35:846-851.
- Chappell R., Eick J., Morgan R. (1992). Shear bond strength and SEM observation of the newest dentin adhesives (abstract). J Dent Res 71:170.
- Chiba M., Itoh K., Wakumoto S. (1989). Effect of dentin cleansers on the bonding efficacy of dentin adhesive. Dent Mater J 8:76-85.[Medline]
[Order article via Infotrieve]
- Duke ES ( 1992). Clinical studies of adhesive systems. Oper Dent (Suppl 5):103-110.[Medline]
[Order article via Infotrieve]
- Duke ES, LindemuthJ. (1990). Polymeric adhesion to dentin: contrasting substrates. Am J Dent 3:264-270.[Medline]
[Order article via Infotrieve]
- Duke ES, LindemuthJ. (1991). Variability of clinical dentin substrates. Am J Dent 4:241-246.[Medline]
[Order article via Infotrieve]
- Eliades GC, Caputo AA, Vougiouklakis GJ (1985). Composition, wetting properties and bond strength with dentin of six new dentin adhesives. Dent Mater 1:170-176.[Medline]
[Order article via Infotrieve]
- Erickson RL (1989). Mechanism and clinical implications of bond formation for two dentin bonding agents. Am J Dent 2:117-123.
- Erickson RL (1992). Surface interactions of dentin adhesive materials. Oper Dent (Suppl 5):81-94.
- Feilzer AJ, de Gee AJ, Davidson CL (1990). Relaxation of polymerization contraction shear stresses by hygroscopic expansion. J Dent Res 69:36-39.
- Fowler CS, Swartz ML, Moore BK, Rhodes BF (1992). Influence of selected variables on adhesion testing. Dent Mater 8:265-269.[CrossRef][Medline]
[Order article via Infotrieve]
- Fukushima T., Horibe T. (1990). A scanning electron microscope investigation of bonding of methacryloyloxyalkyl hydrogen maleate to etched dentin. J Dent Res 69:46-50.
- Gwinnett AJ (1992). Moist versus dry dentin: Its effect on shear bond strength. Am J Dent 5:127-129.[Medline]
[Order article via Infotrieve]
- Gwinnett AJ, Matsui A. (1967). A study of enamel adhesives. The physical relationship between enamel and adhesive. Arch Oral Biol 12:1615-1620.[Medline]
[Order article via Infotrieve]
- Gwinnett AJ, Jendresen MD (1978). Micromorphologic features of cervical erosion after acid conditioning and its relation with composite resins. J Dent Res 57:543-549.
- Gwinnett AJ, Kanca (1992). Micromorphology of the bonded dentin interface and its relationship to bond strength. Am J Dent 5:73-77.[Medline]
[Order article via Infotrieve]
- Heilman JR, Wefel JS (1989). Effect of remineralization on demineralized root surf aces (abstract). J Dent Res 68:351.
- Heymann HO, Sturdevant JR, Bayne S., Wilder AD, Sluder TB, Brunson WD (1991). Examining tooth flexure effects on cervical restorations: a two-year clinical study. J Am Dent Assoc 122:41-47.[Medline]
[Order article via Infotrieve]
- Hotta K., Mogi M., Miura F., Nakabayashi N. (1992). Effect of 4-MET on bond strength and penetration of monomers into enamel. Dent Mater 8:173-175.[Medline]
[Order article via Infotrieve]
- Imai Y., Kadoma Y., Kojima K., Akimoto T., Ikakura K., Ohta T. ( 1991). Importance of polymerization initiator systems and interfacial initiation of polymerization in adhesive bonding of resin to dentin. J Dent Res 70:1088-1091.
- Johnson GH, Powell LV, Gordon GE (1991). Dentin bonding systems: a review of current products and techniques. J Am Dent Assoc 122:34-41.[Medline]
[Order article via Infotrieve]
- Johnston AD, Bowen RL (1991). Protective coatings for tooth crowns. J Am Dent Assoc 122:49-51.[Abstract]
- Kanca J. (1992a). Resin bonding to wet substrate. 1. Bonding to dentin. Quint Int 23:39-41.
- Kanca J. (1992b). Effect of resin primer solvents and surf ace wetness on resin composite bond strength to dentin. Am J Dent 5:213-215.[Medline]
[Order article via Infotrieve]
- Kerr Manufacturing Company (1992). OptiBondTM. Multi-use filled adhesive. Technical profile.
- Kurosaki N., Kubota M., Yamamoto Y., Fusayama T. (1990). The effect of etching on the dentin of the clinical cavity floor. Quint Int 21:87-92.
- Leung RL, Fan PL, Johnston WM (1983). Post-irradiation polymerizationof visible light-activated composite resin. J Dent Res 62:363-365.
- Lloyd BA, McGinley MB, Brown WS (1978). Thermal stress in teeth. J Dent Res 57:571-582.
- 3M Dental Products Division (1992). Scotchbond Multi-Purpose Dental Adhesive System. Technical Product Profile.
- McGuckin RS, Tao L., Thompson WO, Pashley DH (1991). Shear bond strength of Scotchbond in vivo. Dent Mater 7:50-53.[Medline]
[Order article via Infotrieve]
- Mendis Brrn, Darling AI (1979). A scanning electron microscope and microradiographic study of closure of human coronal dentin tubules related to occlusal attrition and caries. Arch Oral Biol 24:725-733.[Medline]
[Order article via Infotrieve]
- Misra DN (1989). Adsorption of 4-methacryloxyethyl trimellitate anhydride (4-META) on hydroxyapatite and its role in composite bonding. J Dent Res 68:42-47.
- Mitra SB (1991). Adhesion to dentin and physical properties of a light-cured glass-ionomer liner/base. J Dent Res 70:72-74.
- Munksgaard EC, Asmussen E. (1985). Dentin-polymer bond mediated by glutaraldehyde/HEMA. Scand J Dent Res 93:463-466.[Medline]
[Order article via Infotrieve]
- Nakabayashi N., Kojima K., Masuhara E. (1982). The promotion of adhesion by the infiltration of monomers into tooth substrates. J Biomed Mater Res 16:265-273.[CrossRef][Medline]
[Order article via Infotrieve]
- Nakabayashi N. (1985a). Bonding of restorative materials todentine: the present status in Japan. Int DentJ 35:145-154.
- Nakabayashi N. (1985b). Biocompatibility and promotion of adhesion to tooth substrates. CRC Crit Rev Biocompatibil 1:25-52.
- Nakabayashi N. (1992). Adhesive bonding with 4-META. Oper Dent (Suppl 5):125-130.
- Nakabayashi N., Takarada K. (1992). Effect of HEMA on bonding to dentin. Dent Mater 8:125-130.[Medline]
[Order article via Infotrieve]
- Nakabayashi N., Watanabe A., Gendusa NJ (1992). Dentin adhesion of "modified" 4-META/MMA-TBB resin: function of HEMA. Dent Mater 8:259-264.[Medline]
[Order article via Infotrieve]
- Ozaki M., Suzuki M., Itoh K., Wakumoto S. (1991). Laser-Raman spectroscopic study of the adhesive interface between 4-MET/MMA-TBB resin and hydroxyapatite or bovine enamel. Dent Mater J 10:105-120.[Medline]
[Order article via Infotrieve]
- Pashley DH (1989). Dentin: a dynamic substrate-a review. Scanning Microsc 3:161-176.[Medline]
[Order article via Infotrieve]
- Pashley DH (1991). Dentin bonding: overview of the substrate with respect to adhesive material. J Esthet Dent 3:46-50.[Medline]
[Order article via Infotrieve]
- Pashley DH (1992). The effects of acid-etching on the pulpodentin complex. Oper Dent 17:229-242.[Medline]
[Order article via Infotrieve]
- Pashley DH, Livingstone MJ, Greenhill JD (1978). Regional resistances to fluid flow in human dentine in vitro. Arch Oral Biol 23:807-810.[Medline]
[Order article via Infotrieve]
- Pashley DH, Kepler EE, Williams EC, O'Meara JA (1984). The effect on dentine permeability of time following cavity preparations in dogs. Arch Oral Biol 29:65-68.[Medline]
[Order article via Infotrieve]
- Pashley DH, Andringa HJ, Derkson GD, Derkson ME, Kalathoor S. (1987). Regional variability in the permeability of human dentine. Arch Oral Biol 32:519-523.[Medline]
[Order article via Infotrieve]
- Pashley DH, Horner JA, Brewer PD (1992). Interactions of conditioners on the dentin surface. Oper Dent (Suppl 5):137-150.
- Prati C., Montanari G., Biagini G., Fava F., Pashley DH (1992). Effects of dentin surface treatments on the shear bond strength of Vitrabond. Dent Mater 8:21-26.[Medline]
[Order article via Infotrieve]
- Richards FM, Knowles JR (1968). Glutaraldehyde as a protein crosslinking reagent. J Molec Biol 37:231-233.[CrossRef][Medline]
[Order article via Infotrieve]
- Ruse ND, Smith DC (1991). Adhesion to bovine dentin-surface characterization. J Dent Res 70:1002-1008.
- Schumacher GE, Eichmiller FC, AntonucciJM (1992). Effects of surface-active resins on dentin/composite bonds. Dent Mater 8:278-282.[Medline]
[Order article via Infotrieve]
- Sidhu SK, Soh G., Henderson LJ (1991). Effect of dentin age on effectiveness of bonding agents. Oper Dent 16:218-222.[Medline]
[Order article via Infotrieve]
- Smith DC (1992). Polyacrylic acid-based cements: adhesion to enamel and dentin. Oper Dent (Suppl 5):177-183.
- Soderholm K-JM (1991). Correlation of in vivo and in vitro performance of adhesive restorative materials: a report of the ASC MD156 Task Group on test methods for the adhesion of restorative materials. Dent Mater 7:74-83.[CrossRef][Medline]
[Order article via Infotrieve]
- Spencer P., Byerley TJ, Eick JD, Witt JD ( 1992). Chemical characterization of the dentin/adhesive interface by Fourier Transform Infrared Photoacoustic Spectroscopy. Dent Mater 8:10-15.[Medline]
[Order article via Infotrieve]
- Suh BI (1991). All-Bond-fourth generation dentin bonding system. J Esthet Dent 3:139-147.[Medline]
[Order article via Infotrieve]
- Suzuki M., Gwinnett AJ (1991). Relationship of bonded resin composite restorations to dentin (abstract). J Dent Res 70:525.
- Swif EJ, Triolo PT (1992). Bond strengths of Scotchbond Multi-Purpose to moist dentin and enamel. Am J Dent 5:318-320.[Medline]
[Order article via Infotrieve]
- Takuma S. (1960). Electron microscopy of the structure around the dentinal tubule. J Dent Res 39:973-981.
- Tao L., TagamiJ, Pashley DH (1991). Pulpal pressures and bond strengths of Superbond and Gluma. Am J Dent 4:73-76.[Medline]
[Order article via Infotrieve]
- Ten Cate AR (1989). Oral histology: development, structure and function. 3rd ed. St. Louis, MO: The C.V. Mosby Company, pp. 157-196.
- Thompson VP, Edler TL, DavisG. ( 1989). XPS characterization of dentin and dentin treated with bonding primers (abstract). J Dent Res 68:958.
- Torney DL (1978). The retentive ability of acid-etched dentin. J Prosthet Dent 39:169-172.[Medline]
[Order article via Infotrieve]
- Triolo PT, Swift EJ (1992). Shear bond strength of ten dentin adhesive systems. Dent Mater 8:370-374.[Medline]
[Order article via Infotrieve]
- Van Meerbeek B., Inokoshi S., Braem M., Lambrechts P., Vanherle G. (1992). Morphological aspects of the resin-dentin interdif fusion zone with different dentin adhesive systems. J Dent Res 71:1530-1540.
- Van Meerbeek B., Dhem A., Goret-Nicaise M., Braem M., Lambrechts P., Vanherle G. (1993). Comparative SEM and TEM examination of the ultrastructure of the resin-dentin interdiffusion zone. J Dent Res 72:495-501.
- Van Strijp AJP, Klont B., Ten Cate JM (1992). Solubilization of dentin matrix collagen in situ. J Dent Res 71:1498-1502.
- Wang T., Nakabayashi N. (1991). Effect of 2-(methacryloxy)ethyl phenyl hydrogen phosphate on adhesion to dentin. J Dent Res 70:59-66.
- Yoshiyama M., Mosada J., Uchida A., Ishida H. (1989). Scanning electron microscopic characterization of sensitive vs. insensitive human radicular dentin. J Dent Res 68:1498-1502.
Journal of Dental Research, Vol. 73, No. 1,
44-55 (1994)
DOI: 10.1177/00220345940730010601

CiteULike Complore Connotea Del.icio.us Digg Reddit Technorati Twitter What's this?
This article has been cited by other articles:

|
 |

|
 |
 
J.E. Nor, R.J. Feigal, J.B. Dennison, and C.A. Edwards
Dentin Bonding: SEM Comparison of the Resin-Dentin Interface in Primary and Permanent Teeth
Journal of Dental Research,
June 1, 1996;
75(6):
1396 - 1403.
[Abstract]
[PDF]
|
 |
|
|
|