This Article Abstract Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Similar articles in PubMed Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via HighWire Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Aquilino, S.A. Articles by Piotrowskp, T.J. Search for Related Content PubMed PubMed Citation Articles by Aquilino, S.A. Articles by Piotrowskp, T.J. Pubmed/NCBI databases Compound via MeSH Substance via MeSH Social Bookmarking                         What's this?

Tensile Fatigue Limits of Prosthodontic Adhesives

Department of Prosthodontics, University of Iowa, Iowa City, Iowa 52242

A.M. Diaz-Arnold

Department of Family Dentistry, University of Iowa, Iowa City, Iowa 52242

T.J. Piotrowskp

Dental Research Student, College of Dentistry, University of Iowa, Iowa City, Iowa 52242

Tensile fatigue limits and ultimate tensile strengths of some prosthodontic adhesive systems were determined. Ni-Cr-Be cylinders were: electro-etched, chemically etched, and sandblasted prior to being bonded end-to-end with BIS-GMA and 4-META adhesives. Bonded specimens were stored in distilled de-ionized water for three days prior to being tested. Fifteen paired specimens per group were subjected to a cyclic tensile load for 1000 cycles. Tensile fatigue limits were determined by the staircase method. Five specimens per group were tested for ultimate tensile strength. In addition, those specimens which survived the 1000 cycles during fatigue testing were also tested for ultimate tensile strength. Statistical evaluations to compare tensile fatigue limits and ultimate tensile strengths for fatigued and non-fatigued specimens were then performed.

The results indicated that the tensile fatigue limit and the ratio of fatigue limit to ultimate tensile strength of the sandblasted, 4-META adhesive system were significantly lower than those of the other systems tested. The application of a cyclic load significantly decreased the ultimate tensile bond strength of the 4-META adhesive. Application of a cyclic load had no significant effect on the ultimate tensile bond strengths of the BIS-GMA systems tested.

REFERENCES

• Aquilino, S.A.; Diaz-Arnold, A.M.; and Krueger, G.E. (1989): Tensile Bond Strengths of an Electrolytically and Chemically Etched Base Metal Alloy, Int J Prosthodont 3:93-97.
• Atta, M.O.; Smith, B.G.N.; and Brown, D. (1989): Stress Cycling of Bonding Systems for Direct Bonded Bridge Retainers, J Dent Res 68:250, Abst. No. 549.
• Barzilay, I.; Myers, M.L.; Cooper, L.F.; and Graser, G.N. (1988): Mechanical and Chemical Retention of Laboratory Cured Composite Resins, J Prosthet Dent 59:131-137.[CrossRef][Medline] [Order article via Infotrieve]
• Diaz-Arnold, A.M.; Williams, V.D.; and Aquilino, S.A. (1989): Tensile Strengths of Three Luting Agents for Adhesion Fixed Partial Dentures, Int J Prosthodont 2:115-122.[Medline] [Order article via Infotrieve]
• Draughn, R.A. (1979): Compressive Fatigue Limits of Composite Restorative Materials, J Dent Res 58:1093-1096.[Abstract/Free Full Text]
• Draughn, R.A. (1985): Fatigue and Fracture Mechanics of Composite Resins. In: Posterior Composite Resin Dental Restorative Materials, G. Vanherle and D.C. Smith, Eds., St. Paul: 3M Company, pp. 299-307.
• Haywood, V.B.; Lundeen, T.F.; and Taylor, D.F. (1987): Tensile Bond Strengths of Comspan to Electrolytically Etched Metal With and Without Enamel Bonding Agent, Dent Mater 3:29-32.[Medline] [Order article via Infotrieve]
• Krueger, G.E.; Diaz-Arnold, A.M.; Aquilino, S.A.; and Scandrett, F.R. (1990): A Comparison of Electrolytic and Chemical Etch Systems on the Resin to Metal Tensile Bond Strength, J Prosthet Dent 64:610-617.[CrossRef][Medline] [Order article via Infotrieve]
• Livaditis, G.J. (1986): A Chemical Etching System for Creating Micromechanical Retention in Resin-bonded Retainers, J Prosthet Dent 56:181-188.[CrossRef][Medline] [Order article via Infotrieve]
• Omura, I.; Yamauchi, J.; Harada, I.; and Wada, T. (1984): Adhesive and Mechanical Properties of a New Dental Adhesive, J Dent Res 63:233, Abst. No. 561.
• Rueggeberg, F.A.; Caughman, W.F.; Gao, F.; and Ko-Varik, R.E. (1989): Bond Strength of Panavia EX to Dental Amalgam, Int J Prosthodont 2:371-375.[Medline] [Order article via Infotrieve]
• Saunders, W.P. (1987): The Effect of Fatigue Impact Forces upon the Retention of Various Designs of Resin-retained Bridgework, Dent Mater 3:85-89.[Medline] [Order article via Infotrieve]
• Tanaka, T.; Nagata, K.; Takeyama, M.; Atsuta, M.; Nakabayashi, N.; and Masuhara, E. (1981): 4-META Opaque Resin: A New Resin Strongly Adhesive to Nickel-Chromium Alloy, J Dent Res 60:1697-1706.[Abstract/Free Full Text]
• Tanaka, T.; Fujiyama, E.; Shimizu, H.; Takaki, A.; and Atsuta, M. (1986): Surface Treatment of Nonprecious Alloys for Adhesion-fixed Partial Dentures, J Prosthet Dent 55:456-462.[CrossRef][Medline] [Order article via Infotrieve]
• Thompson, V.P.; Castillo, E.D.; and Livaditis, G.J. (1983): Resin-bonded Retainers. Part 1: Resin Bond to Electrolytically Etched Nonprecious Alloys, J Prosthet Dent 50:771-779.[CrossRef][Medline] [Order article via Infotrieve]
• Thompson, V.P.; Grolman, K.M.; and Liao, R. (1985): Bonding of Adhesive Resins to Non-precious Alloys, J Dent Res 64:313, Abst. No. 1258.
• Thompson, V.P. and Wood, M. (1987): Design of Bonded Cast Bridges: Six Years in Retrospect. In: Proceedings, International Symposium on Adhesive Prosthodontics, L. Gettleman, M.M.A. Vrijhoef, and Y. Uchiyama, Eds., Nijmegen: Eurosound Drukkerij B.V., pp. 91-105.
• Watanabe, F.; Powers, J.M.; and Lorey, R.E. (1988): In vitro Bonding of Prosthodontic Adhesives to Dental Alloys, J Dent Res 67:479-483.[Abstract/Free Full Text]
• Yamashita, A. and Yamami, T. (1987): Adhesion Bridges, Background and Clinical Procedure. In: Proceedings, International Symposium on Adhesion Prosthodontics, L. Gettleman, M.M.A. Vrijhoef, and Y. Uchiyama, Eds., Nijmegen: Eurosound Drukkerij B.V., pp. 61-76.
• Yu, X.Y. (1986): A Study of Chemical Coupling of Resin Bonded Restorations, Quint Int 17:191-194.
• Yu, X.Y. and Xu, J.W. (1987): The Tensile Bond Strength of Various Composite Resins to Alloy, Quint Int 18:145-147.
• Zardiackas, L.D.; Caldwell, D.J.; Caughman, W.F.; Lentz, D.L.; and Comer, R.W. (1988): Tensile Fatigue of Resin Cements to Etched Metal and Enamel, Dent Mater 4:163-168.[CrossRef][Medline] [Order article via Infotrieve]

Journal of Dental Research, Vol. 70, No. 3, 208-210 (1991)
DOI: 10.1177/00220345910700031001


CiteULike    Complore    Connotea    Del.icio.us    Digg    Reddit    Technorati    Twitter    What's this?

This article has been cited by other articles:

				N.H.J. Creugers, A.F. Kayser, and M.A. Van't Hof A Seven-and-a-half-year Survival Study of Resin-bonded Bridges Journal of Dental Research, November 1, 1992; 71(11): 1822 - 1825. [Abstract] [PDF]

This Article Abstract Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Similar articles in PubMed Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via HighWire Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Aquilino, S.A. Articles by Piotrowskp, T.J. Search for Related Content PubMed PubMed Citation Articles by Aquilino, S.A. Articles by Piotrowskp, T.J. Pubmed/NCBI databases Compound via MeSH Substance via MeSH Social Bookmarking                         What's this?