|
Sign In to gain access to subscriptions and/or personal tools.
|
Oxidation and Ceramic Coatings on 80Ni20Cr Alloys
J.A. Pask
Department of Materials Science and Mineral Engineering, University of California, Berkeley, California 94720
A.P. Tomsia
Department of Materials Science and Mineral Engineering, University of California, Berkeley, California 94720
Additives and/or impurities in NiCr alloys would be expected to affect the oxidation and adherence of dental glasses. Oxidation characteristics and bonding of several glasses to a commercial impure 80Ni20Cr alloy and laboratory-prepared purer alloys were thus studied at 1000°C. The commercial alloy formed a porous and buckled single-layer oxide scale with lenticular voids at the interface. The scale was penetrated by glass which formed a chemical bond at the alloylglass interface, resulting in excellent adherence with fracture in the glassy phase. The purer alloy formed a complex multilayer oxide scale to which the glass bonded but did not penetrate; the assembly was not satisfactory, since fracture occurred in the oxide scale.
REFERENCES
- Anusavice, K.J.; Ringle, R.D.; and Fairhurst, C.W. (1977); Adherence Controlling Elements in Ceramic-Metal Systems. II. Non-precious Alloys, J Dent Res 56:1053-1061.[Abstract/Free Full Text]
- Baran, G.R. (1979): Phase Changes in Base Metal Alloys Along Metal-Porcelain Interfaces, J Dent Res 58:2095-2104.[Abstract/Free Full Text]
- Borom, M.P. (1978): The Mechanical and Chemical Aspects of Glass Sealing, Glass Ind 3:12-21, 4:19-27.
- Brennan, J.J. and Pask, J.A. (1973): Effect of Composition on Glass-Metal Interface Reactions and Adherence, J Am Ceram Soc 56:58-62.
- Mackert, J.R., Jr. (1979): Porcelain Bonding of a Nickel-Chromium Dental Casting Alloy, University of Virginia, School of Engineering and Applied Sciences; Ph.D. Thesis.
- McLean, J.W. and Sced, I.R. (1973): Bonding of Dental Porcelain to Metal. II. The Base-Metal Alloy/Porcelain Bond, Trans Br Ceram Soc 72:235-238.
- Moffa, J.P. (1974): Letter to the Editor in Reader's Round Table, J Prosthet Dent 31:692-693.
- Pask, J.A. (1977): Fundamentals of Wetting and Bonding Between Ceramics and Metals. In: Alternatives to Gold Alloys in Dentistry, T.E. Valega, Ed., Bethesda, MD: DHEW Publication # NIH 77-1227, pp. 235-254.
- Tomsia, A.P. and Pask, J.A. (1986): Chemical Reaction and Adherence at Glass/Metal Interfaces: An Analysis, Dent Mater 2:10-16.[Medline]
[Order article via Infotrieve]
- Tomsia, A.P.; Zhang, F.P.; and Pask, J.A. (1985): Reactions and Bonding of Sodium Disilicate Glass with Chromium, J Am Ceram Soc 68:20-24.
- Wehner, G.K. (1975): The Aspects of Sputtering in Surface Analysis Method. In: Method of Surface Analysis, A.W. Czanderna, Ed., Amsterdam: Elsevier, Chap. 1, pp. 5-37.
- Williams, T.R.P. (1976): A Study of Base Metal-Ceramic Interface Reactions, Indiana University, School of Dentistry, Master's Thesis.
Journal of Dental Research, Vol. 67, No. 9,
1164-1171 (1988)
DOI: 10.1177/00220345880670090501

CiteULike Complore Connotea Del.icio.us Digg Reddit Technorati Twitter What's this?
|
|