|
Sign In to gain access to subscriptions and/or personal tools.
|
A New Ion-coating Surface Treatment of Alloys for Dental Adhesive Resins
T. Tanaka
Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, 7-1, Sakamoto-machi, Nagasaki-city, 852, Japan
M. Hirano
Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, 7-1, Sakamoto-machi, Nagasaki-city, 852, Japan
M. Kawahara
Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, 7-1, Sakamoto-machi, Nagasaki-city, 852, Japan
H. Matsumura
Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, 7-1, Sakamoto-machi, Nagasaki-city, 852, Japan
M. Atsuta
Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, 7-1, Sakamoto-machi, Nagasaki-city, 852, Japan
4-META and new phosphate-methacrylate resins adhere strongly to dental alloys. However, for strengthening the water durability of the adhesive interface, the oxidation of the alloy surface is indispensable. A new oxidation method using ion-sputtering was developed, and the effectiveness of this surface treatment on two dental alloys-a type IV gold alloy and Ni-Cr-Be alloy-was investigated. As an endurance test, thermocycling for a maximum of 100, 000 cycles was adopted, and the tensile adhesive bond strength was then measured. Ion-coating the surface of the alloys resulted in strong bonds with adhesive resins, and after 100, 000 thermocycles, a bond strength of above 20 MPa was maintained.
REFERENCES
- Barzilay, I.; Myers, M.L.; Cooper, L.B.; and Graser, G.N. (1988): Mechanical and Chemical Retention of Laboratory-cured Composite to Metal Surfaces, J Prosthet Dent 59:131-137.[CrossRef][Medline]
[Order article via Infotrieve]
- Creugers, N.H.; Welle, P.R.; and Vrijhoef, M.M. (1988): Four Bonding Systems for Resin-retained Cast Metal Prostheses, Dent Mater 4:85-88.[CrossRef][Medline]
[Order article via Infotrieve]
- Hirano, M.; Tanaka, T.; Matsumura, H.; Atsuta, M.; and Nagata, K.: Study on Ion-coating Surface Treatment of Dental Alloys for Adhesion, Part 2. Effect of Sn and Sn-Cu Target on Precious Alloys, J Jpn Prosthodont Soc (in Japanese; in press).
- Livaditis, G.J. and Thompson, V.P. (1982): Etched Castings: An Improved Retentive Mechanism for Resin-bonded Retainers, J Prosthet Dent 47:52-58.[CrossRef][Medline]
[Order article via Infotrieve]
- Matsumura, H. and Nakabayashi, N. (1988): Adhesive 4-META/MMA-TBB Opaque Resin with Poly(methyl methacrylate)-coated Titanium Dioxide, J Dent Res 67:29-32.[Abstract/Free Full Text]
- Matsumura, H.; Varga, J.; and Masuhara, E. (1986): Composite Type Adhesive Opaque Resin, Dent Mater J 5:83-90.[Medline]
[Order article via Infotrieve]
- Nakabayashi, N.; Tomota, K.; and Matsumura, H. (1987): Relationship between the Shape of Adherend and the Bond Strength, Jpn J Dent Mat 6:422-425 (in Japanese).
- Nishuima, T.; Shinya, A.; and Yokozuka, S. (1988): Basic Studies on the Testing Method of Adhesives, J Jpn Prosthodont Soc 32:137-150 (in Japanese).
- Noguchi, H.; Nakamura, K.; Ozonoe, Y.; and Etchu, Y. (1985): On Adhesive and Mechanical Properties of Dental Cements-Thermal Influence, Jpn J Dent Mat 4:543-550 (in Japanese).
- Ohno, H.; Araki, Y.; Endo, K.; Kawashima, I.; Yamane, Y.; and Sagara, M. (1987): The Adhesion Mechanism of Dental Adhesive Resin to the Alloy, Jpn J Dent Mat 6 (Spec Iss):110-111 (in Japanese).
- Shimizu, H.; Takagi, A.; Moriguchi, S.; Kawahara, M.; Tanaka, T.; and Atsuta, M. (1986): Influence of the Shape of Wing Portions of an Anterior Acid-etched Fixed Partial Denture on the Bond Strength to Abutment Teeth, J Jpn Prosthodont Soc 30:392-397 (in Japanese).
- Takeyama, M.; Kashibuchi, S.; Nakabayashi, N.; and Masuhara, E. (1978): Studies on Dental Self-curing Resins (17) Adhesion of PMMA with Bovine Enamel or Dental Alloys, J Jpn Soc Dent Appar Mater 19:179-185 (in Japanese).
- Tanaka, T.; Atsuta, M.; Nakabayashi, N.; and Masuhara, E.: Surface Treatment of Gold Alloys for Adhesion, J Prosthet Dent (in press).
- Tanaka, T.; Fujiyama, E.; Shimizu, H.; Takaki, A.; and Atsuta, M. (1986): Surface Treatment of Nonprecious Alloys for Adhesion-Fixed Partial Dentures, J Prosthet Dent 55:456-462.[CrossRef][Medline]
[Order article via Infotrieve]
- Tanaka, T.; Hirano, M.; Matsumura, H.; Atsuta, M.; and Nagata, K. (1988): Study on Ion-coating Surface Treatment of Dental Alloys for Adhesion. Part 1. Effect of Cu Target on Precious Alloys, J Jpn Prosthodont Soc 32:181-188 (in Japanese).
- Tanaka, T.; Nagata, K.; Takeyama, M.; Atsuta, M.; Nakabayashi, N.; and Masuhara, E. (1981): 4-META Opaque Resin-A New Resin Strongly Adhesive to Nickel-Chromium Alloy, J Dent Res 60:1697-1706.[Abstract/Free Full Text]
- Watanabe, F.; Powers, J.M.; and Lorey, R.E. (1988): In vitro Bonding of Prosthodontic Adhesives to Dental Alloys, J Dent Res 67:479-483.[Abstract/Free Full Text]
- Yamashita, A.; Kondo, Y.; and Fujita, M. (1984): Adhesive Strength of Adhesive Resin Panavia EX to Dental Alloys, Part 2. Adhesive Strength of Precious Alloys, J Jpn Prosthodont Soc 26:1023-1033 (in Japanese).
Journal of Dental Research, Vol. 67, No. 11,
1376-1380 (1988)
DOI: 10.1177/00220345880670110301
 CiteULike  Complore  Connotea  Del.icio.us  Digg  Reddit  Technorati  Twitter What's this?
This article has been cited by other articles:
|
|
|
|
 
I. Watanabe, N. Nakabayashi, and D.H. Pashley
Bonding to Ground Dentin by a Phenyl-P Self -etching Primer
Journal of Dental Research,
June 1, 1994;
73(6):
1212 - 1220.
[Abstract]
[PDF]
|
|
|
|
|
|
|
H. Ohno, Y. Araki, and K. Endo
ESCA Study on Dental Alloy Surfaces Modified by Ga-Sn Alloy
Journal of Dental Research,
June 1, 1992;
71(6):
1332 - 1339.
[Abstract]
[PDF]
|
|
|
|
|
|
|
T. Wang and N. Nakabayashi
Effect of 2-(Methacryloxy)ethyl Phenyl Hydrogen Phosphate on Adhesion to Dentin
Journal of Dental Research,
January 1, 1991;
70(1):
59 - 66.
[Abstract]
[PDF]
|
|
|
|
|
