|
Sign In to gain access to subscriptions and/or personal tools.
|
Dentin-Polymer Bond in Resin Fillings Tested in vitro by Thermo- and Load-cycling
E.C. Munksgaard
Department of Technology, Royal Dental College, Panum Institute, Blegdamsvej 3, 24.3.45, 2200 Copenhagen N, Denmark
K. Itoh
Department of Technology, Royal Dental College, Panum Institute, Blegdamsvej 3, 24.3.45, 2200 Copenhagen N, Denmark
K.D. Jorgensen
Department of Technology, Royal Dental College, Panum Institute, Blegdamsvej 3, 24.3.45, 2200 Copenhagen N, Denmark
The effect of stress applied by thermo- and load-cycling to the bond between composite- and bonding-agent-treated dentin was tested. Cylindrical cavities in extracted human teeth, approximately one-half of the margins in dentin, were etched and treated with two bonding agents - Gluma and Clearfil Bond - before being filled with Silux composite. Forty specimens, some provided with cavity floor lining, were cycled several hundred times between 15° and 50°C, either immediately after light-curing or upon 24 hr of water storage. In all cases, microscopic inspection revealed unchanged adaptation at the dentin margins. Teeth with Class 3 and Class 5 cavities, ten of each and with the gingival margins entirely in dentin, were pre-treated and filled as above. The teeth were covered with a dye during loading and unloading in a manner simulating biting and chewing. Inspection of the cavity margins revealed absence of percolation at the dentin margins.
It is concluded that effective bonding agents are necessary to prevent contraction gaps in resin-filled cavities where the margins are partly or entirely located in dentin.
REFERENCES
- Asmussen, E. (1974): The Effect of Temperature Changes on Adaptation of Resin Fillings. II, Acta Odontol Scand 32:291-297.[CrossRef][Medline]
[Order article via Infotrieve]
- Beham, G. (1984): Dentin Adhesion of Resin Restorative Materials. In: Ivoclar-Vivadent-Report, V. Reinberg er, Ed., Schaan, Liechtenstein: Ivoclar AG, p. 5.
- Brannstrom, M. and Vojinovid, O. (1976): Response of the Dental Pulp to Invasion of Bacteria around Three Filling Materials, J Dent Child 43:83-89.[Medline]
[Order article via Infotrieve]
- Fan, P.L. (1984): Resin Dentin Bonding Systems, JADA 108:240-241.
- Jorgensen, K.D.; Matono, T.; and Shimokobe, H. (1976): Deformation of Cavities and Resin Fillings in Loaded Teeth, Scand J Dent Res 84:46-50.[Medline]
[Order article via Infotrieve]
- Masuhara, E. (1982): Die Neuentwickelten Haftfahigen Kunststoffe und ihre Klinische Anwendung, Dtsch Zahnarztl Z 37: 155-159.[Medline]
[Order article via Infotrieve]
- Munksgaard, E.C. and Asmussen, E. (1984): Bond Strength between Dentin and Restorative Resins Mediated by Mixtures of HEMA and Glutaraldehyde, J Dent Res 63:1087-1089.[Abstract/Free Full Text]
- Munksgaard, E.C.; Hansen, E.K.; and Asmussen, E. (1984): Effect of Five Adhesives on Adaptation of Resin in Dentin Cavities, Scand J Dent Res 92:187-191.
- Munksgaard, E.C.; Itoh, K.; Asmussen, E.; and Jorgensen, K.D. (1985): Effect of Combining Dentin Bonding Agents, Scand J Dent Res, in press.
- Nelsen, R.J.; Wolcott, R.B.; and Paffenbarger, G.C. (1952): Fluid Exchange at the Margins of Dental Restorations, JADA 44:288-295.
Journal of Dental Research, Vol. 64, No. 2,
144-146 (1985)
DOI: 10.1177/00220345850640021001
 CiteULike  Complore  Connotea  Del.icio.us  Digg  Reddit  Technorati  Twitter What's this?
This article has been cited by other articles:
|
|
|
|
 
I. Krejci, M. Kuster, and F. Lutz
Influence of Dentinal Fluid and Stress on Marginal Adaptation of Resin Composites
Journal of Dental Research,
February 1, 1993;
72(2):
490 - 494.
[Abstract]
[PDF]
|
|
|
|
|
|
|
C.M. Kemp-Scholte and C.L. Davidson
Complete Marginal Seal of Class V Resin Composite Restorations Effected by Increased Flexibility
Journal of Dental Research,
June 1, 1990;
69(6):
1240 - 1243.
[Abstract]
[PDF]
|
|
|
|
|
|
|
K.J. Donly, T.W. Wild, R.L. Bowen, and M.E. Jensen
An in vitro Investigation of the Effects of Glass Inserts on the Effective Composite Resin Polymerization Shrinkage
Journal of Dental Research,
August 1, 1989;
68(8):
1234 - 1237.
[Abstract]
[PDF]
|
|
|
|
|
|
|
P.A. Darbyshire, L.B. Messer, and W.H. Douglas
Microleakage in Class II Composite Restorations Bonded to Dentin Using Thermal and Load Cycling
Journal of Dental Research,
March 1, 1988;
67(3):
585 - 587.
[Abstract]
[PDF]
|
|
|
|
|
|
|
W.S. Eakle
Fracture Resistance of Teeth Restored with Class II Bonded Composite Resin
Journal of Dental Research,
February 1, 1986;
65(2):
149 - 153.
[PDF]
|
|
|
|
|
|
|
E.C. Munksgaard, M. Irie, and E. Asmussen
Dentin-Polymer Bond Promoted by Gluma and Various Resins
Journal of Dental Research,
December 1, 1985;
64(12):
1409 - 1411.
[Abstract]
[PDF]
|
|
|
|
|
