This Article Abstract Full Text Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Similar articles in PubMed Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via HighWire Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Tanaka, E. Articles by Tanne, K. Search for Related Content PubMed PubMed Citation Articles by Tanaka, E. Articles by Tanne, K. Social Bookmarking                         What's this?

Dynamic Shear Properties of the Temporomandibular Joint Disc

¹ Department of Orthodontics and Craniofacial Developmental Biology, Hiroshima University Graduate School of Biomedical Sciences, 1-2-3 Kasumi, Minami-ku, Hiroshima 734-8553, Japan;
² Department of Functional Anatomy, Academic Centre for Dentistry Amsterdam (ACTA);
³ Division of Mechanical Science, Department of Systems and Human Science, Osaka University School of Engineering Science; and
⁴ Department of Prosthetic Dentistry, Hiroshima University Graduate School of Biomedical Sciences;

View larger version (20K): [in this window] [in a new window]   Figure 1. Location of the two specimens (A) and block diagram (B) of the dynamic viscoelastometer with a schematic representation of the relationship between stress and strain of a viscoelastic material during a sinusoidal oscillating strain (, angular velocity). The sinusoidal strain is produced by a tension control motor in the driver, and the stress and strain are measured by means of load and displacement detectors and transmitted to a data processor. In a viscoelastic material, the phase difference between stress and strain is somewhere in between (0 < < /2), and the complex modulus G* is resolved into two components: the storage modulus G' and the loss modulus G'', shown vectorially. The tangent of the phase angle () between stress and strain is a measure of the ratio of energy loss to energy stored during cyclic deformation.

View larger version (21K): [in this window] [in a new window]   Figure 2. The complex modulus |G*|, storage modulus G', loss modulus G'', and loss tangent tan as a function of frequency. Error bars are standard deviations (for each group, n = 10). The frequency correlates positively with the values of the moduli. A-P test: |G*| G' G'' tan M-L test: • |G*| G' G'' tan

View larger version (11K): [in this window] [in a new window]   Figure 3. Means and standard deviations of storage modulus G', loss modulus G'', and loss tangent tan at 1.0 Hz. White and black bars are values in A-P and M-L tests, respectively. Error bars are standard deviations (for each group, n = 10). Asterisks: significance of difference between the groups (** p < 0.01; * p < 0.05) as tested with a paired Student t test.

Journal of Dental Research, Vol. 82, No. 3, 228-231 (2003)
DOI: 10.1177/154405910308200315


CiteULike    Complore    Connotea    Del.icio.us    Digg    Reddit    Technorati    Twitter    What's this?