| Sign In to gain access to subscriptions and/or personal tools. |
Abrasion of Human Enamel by Different Dental Ceramics in vitroSchool of Dentistry, University of California at Los Angeles, Los Angeles, California 90024
The Ohio State University, College of Dentistry, Columbus, Ohio 43210
School of Dentistry, University of California at Los Angeles, Los Angeles, California 90024 Manufacturers generally quote indentation hardness values when predicting the clinical wear potential of newly introduced ceramic restoratives. The objective of this study was to determine whether in vitro two-body wear correlated well with hardness. A modified polisher was used to abrade enamel cylinders against polished disks of commercially available dental porcelains and glass. Enamel loss after four h was measured with a micrometer. Five ceramic materials were tested, and enamel abrasion rates were correlated with Knoop hardness values. Dicor and Dicor coated with a shading porcelain were found to cause the lowest wear of enamel. These rates were statistically significantly lower than those obtained with Optec, the most abrasive material. These findings may be due to microstructural differences between the materials. Knoop hardness showed poor correlation with the results of the abrasive testing.
Journal of Dental Research, Vol. 70, No. 3,
221-225 (1991) This article has been cited by other articles:
|
|
|||||||||||||||

